30
a) While operate the machine, always wear substantial footwear and long trousers. Do not operate the
equipment when barefoot or wearing open sandals. Avoid wearing clothing that is loose fitting or
that has hanging cords or ties.
b) Thoroughly inspect the area where the equipment is to be used and remove all objects which can
be thrown by the machine.
c) Before using, always visually inspect to see that the blade, blade bolt and the blade assembly are
not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
Replace damaged and unreadable labels.
d) Before use check the supply and extension cord for signs of damage or aging. If the cord becomes
damaged during the use, disconnect the cord from the supply immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is damaged
or worn.
Operation
a) Operate the machine only in daylight or in good artificial light.
b) Avoid operating the machine in wet grass.
c) Always be sure of your footing on slopes.
d) Walk, never run.
e) Mow across the face of slopes, never up and down.
f) Exercise extreme caution when changing direction on slopes.
g) Do not mow excessively steep slopes.
h) Use extreme caution when reversing or pulling the lawnmower towards you.
i) Stop the blade(s) if the lawnmower has to be tilted for transportation when crossing surfaces other
than grass, and when transporting the lawnmower to and from the area to be mowed.
j) Never operate the lawnmower with defective guards, or without safety devices, for example
deflectors and/or grass catchers, in place.
k) Switch on the motor carefully according to instructions and with feet well away from the blade(s).
l) Do not tilt the lawnmower when switching on the motor, except if the lawnmower has to be tilted
for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is
away from the operator.
m) Do not start the machine when standing in front of the discharge.
n) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all
times.
o) Do not transport the lawnmower while the power source is running.
p) Stop the machine and disconnect the plug from the mains. Make sure that all moving parts have
come to complete stop.
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the lawnmower;
- after striking a foreign object. Inspect the lawnmower for damage and make repairs before
restarting and operating the lawnmower.
if the lawnmower starts to vibrate abnormally (check immediately)
- inspect for damage;
- replace or repair any damaged parts;
- check for and tighten any loose parts.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the machine is in safe working
condition;
b) Check the grass catcher frequently for wear or deterioration;
c) Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories.
d) Be careful during adjustment of the machine to prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
e) On machines with multi blade, take care as rotating one blade can cause other blades to rotate.
Summary of Contents for CCE1500
