Lissmac UNICUT 520, Operating Manual

Page: 44 / 92

44/92
7. OPERATION
7.1. Safety
General rules • The floor saw may only be operated by one person.
Direct other people out of the work area or build a barrier.
•
The operator must not leave his workplace while the engine is running and the saw blade is
turning.
•
Never start the machine when the saw blade rests on the ground.
The drive will be overloaded.
•
Do not correct cutting errors "by force".
This will only damage the saw blade and the machine.
•
Never disengage the machine. Always first lift the blade out of the joint.
• Do not operate the machine in case of fatigue and exhaustion or under the influence of alcohol,
drugs or medication.
•
Use only saw blades of the suitable type and size.
• NEVER use damaged saw blades.
•
Keep the machine clean and operate only in a technically flawless condition.
•
Ensure stable water supply.
•
Remove all obstacles from the cutting area.
•
Ensure good lighting at night.
• Make only straight cuts.
WARNING
Rotating saw blade
Severe injuries due to rotating saw blade or ejected parts.

Only cut with the blade guard in closed position.
 Keep safety distance.
 Never touch the rotating blade.

Wear personal protective equipment.
DANGER
Danger from underground supply lines
Risk of cutting into water, electricity, gas or telecommunication lines.
Possible electric shocks, burns, explosions and the interruption of emergency call facilities.

Consult your local authorities for detailed information on cables and wiring in the work area
before cutting.

Create an emergency plan. Have the contact number of the utility companies available.

Inform the responsible utility companies.

Wear personal protective equipment.