Service
Grinding machine SMD 123 RE
59
2
Left lubrication point
Lubricate lubrication points (1) and (2).
Fasten cover panel with four screws on the E-device. Tighten screws with specified tightening
torque (see Section 7.3).
Lubricate the lubrication points on the right side of the machine in the same manner.
7.7
Checking the service unit for compressed air
Abb. 33:
Service unit
1
Service unit
2
View window
3
Valve
Check in the view window (2) whether condensation has accumulated in the service unit (1).
If necessary, open the valve (3) and drain condensate.
