Operation
48
Grinding machine SMD 123 RE
Take dressing sheet out of machine (using „service-mode“)
Leave „service-mode“. Set cutting speed to 10 m/s. Set feeding speed to 3 m/min.
Start machine and process the dressing sheet with R-aggregate.
Watch the ammeter. During the grinding procedure, the ammeter should reach the yellow rage
(appr. 24A). Possibly you have to adjust the brass-nut at the Runit to give more or less
pressure.
Run the dressing sheet at least 5 times trough the machine to eliminate the „sharp grit
spikes“.Maybe you have to readjust the pressure between the grinding passages. (watch
ammeter -> approx. 24A)
After this procedure the grinding belt is dressed equaly. The sharp grit spikes are removed and the
grinding belt creates less dust and dirt compared to a new one. Thereby you will have more
friction between conveyor belt and workpiece. Also the „aggresive sharpness“ is eliminated and
you can start production with same and more equal grinding result.
