Lissmac MULTICUT 605 SG, Operating Manual

Page: 38 / 107

38/107
WARNING
Cut hazard form rotating saw blade
Severe cut injuries from to rotating saw blade or ejected parts.

Only cut with the blade guard in closed position.
 Keep safety distance.

Never touch the rotating blade.

Wear personal protective equipment.
WARNING
Break-in hazard
Death or injury from break-in or tipping over.

Make sure the aggregate surface has sufficient load-bearing capacity.

When cutting, make sure the floor saw and the staff are not on the side to be cut off.
CAUTION
Burn hazard
The engine parts like muffler and tailpipe become hot during operation and may cause burns.

Avoid skin contact.

Wear personal protective equipment.

Allow parts to cool before performing work.
For option GH
WARNING
High-pressure fluid injection hazard
A pinhole in a damaged high pressure hydraulic hose can inject oil under the skin. This can cause gangrene
and may lead to amputation.
 Always keep hydraulic hoses in good condition

Check lines with a piece of cardboard, not your bare hands

Wear your personal protective equipment

If you even suspect to have a fluid injection injury, go to the nearest Hospital Emergency Unit
IMMEDIATELY!