13
3.3 Assembly of saw blade
- All switches on the operation desk must be in position “0”
- Start motor with ignition key (pos. 36)en
- Move saw blade drive to highest position
∗
lever pos. 28
∗
control knob pos. 29
Danger!
- Switch off ignition (pos. 21)
- Remove eye bolts (pos. 39+40)
- Uncouple extraction hose and undo saw blade cover
- Remove all screws (pos. 41)
- Remove pressure disk and insert saw blade
Attention!
* Clean flange surfaces
* Arrows indicating direction of rotation (arrow on the blade)
and protection cap must coincide (synchronous saws)
- Mount the pressure disk and screws (pos. 41)
- Assemble saw blade cover and put back extraction hose shoe
