Lissmac DTS 271, Operating Manual

Page: 17 / 22

6. Disassembly
• Return star-delta switch (Pos. 12) to initial position.
• Remove connection cable.
• You should take the water pump out of the water and let the water drain off if there is danger of
frost.
ATTENTION! Pumps that are already frozen must be thawed out before starting them.
• Transport (see 4.)
7. Maintenance
7.1. Maintenance works
* Thoroughly clean the saw once a week (in off circuit condition).
* Check the saw blade daily
7.2. By following works the machine has to be disconnected from the power supply
system
• Repairs at motor * remedied by an expert electrician only
• Repairs at switches * remedied by an expert electrician only
• Repairs at cables * remedied by an expert electrician only
• Saw blade changes
• Repairs at the blade guard
* Thoroughly clean the saw once a week (in off circuit condition).