Lissmac CDR 350, Operating Instruction

Page: 12 / 38

12/38
1.2. Organizational measures
The operating manual must be kept at hand for every person at the place of work of the core drill
stand.
Additions to the operating manual are generally accepted legal and other obligatory regulations for
accident prevention and for environmental protection, which must be observed and instructed.
Such obligations can also relate to e. g. the handling of dangerous materials or wearing personal
protection equipment or traffic-legal regulations.
The personnel assigned with activities at the machine must have read and understand the operating
manual before starting work, and here particularly the chapter safety notes. This applies in particular
to personnel only working occasionally on the crane, e. is too late during the work input. This applies
in particular to personnel g. during preparation, maintenance.
Regularly check safety- and danger-conscious working of the personnel while observing the operating
manual.
Always use the necessary and prescribed, personal protection equipment.
Observe all safety and danger notes on the core drill stand and keep them in a legible state! Replace
safety and danger notes that are damaged or can no longer be read.
Shut the machine down immediately with safety-relevant changes of the machine or its operational
behavior, and label it accordingly. Report the fault to the responsible of the place/person.
Do not make any changes by extensions and conversions without written permission of the
manufacturer. The instructions of the tool manufacturer must be observed.
Only use checked original spare parts of the manufacturer.
Adhere to prescribed periods for inspection or which are indicated in the manual.
A workshop equipment appropriate for the work is absolutely necessary for executing repair
measures.
Machines with combustion motors may not be used in closed areas.
Ensure that the on/off switch can be reached quickly at any time.