Introduction
A key feature of the Digidown Blue and Digidown CR is their ability to upload
tachograph data files to any desired location in the world. This is achieved by
linking the Digidown unit to a mobile phone via Bluetooth and then sending the
data via the internet as an attachment to an e-mail.
Please note that some of the following instructions are necessarily general as the
precise details vary from one phone to another.
Phone Requirements
In order to use the Digidown Blue or Digidown CR to upload data files via a
mobile phone, the phone must have certain features:
Internet access via packet data, e.g. GPRS, EGPRS or 3G, etc.
Bluetooth
Java support including JSR-82
Most Nokia and Sony Ericsson phones which support internet access also support
the other required features. Recent BlackBerry phones and Android phones
running OS version 2.0 and later are also supported.
Initial Phone Set Up
To support the Digidown Blue and Digidown CR data upload function, a small
Java application must be installed on your phone. To download this application, it
is essential that the phone can connect to the internet. In some cases the phone
will receive the required internet connection settings automatically or will already
have them set. If you are not able to connect the phone to the internet then one
way to get the required settings is to go to the phone service provider’s web site
using another computer (search for ‘<service provider> web settings’), select
your phone type, enter your phone number and then the required settings will be
sent to your phone. Alternatively go to your local mobile phone shop and ask
them to help you connect your phone to the internet.
Downloading the Digidown Application
Switch on your phone in the normal way and then either start up the web
browser or select ‘Go to URL’. Enter the web address
http://m.digidown.net
and go to that site. There you will find a ‘Welcome’ message and an invitation to
download the ‘Digidown Application’.
Phone Operating
Instructions
