User Manual for LIQUIPRINT 3D Printers
Version:
WB20141117
18
toolpate”
and specify a directory path for it and name it as “.gcode” file.
Insert the SD card on the machine. Choose “Print from SD” on the main menu and select the file that you
would like to print. The machine starts heating automatically.
Note: if you find the extrusion is too little or no extrusion at all during the printing process, you may use a
rocket screwdriver to adjust the feeder’s gear as below:
F.3 PRINT FROM COMPUTER
Power on the machine first and connect the machine to the computer through USB. Click on automatical
recognition.
Turn the screwdriver
counter-clockwise to
tighten the gear.
Move down the white
block to the middle place
to tighten the gear.
Note: the gear can not be too
tight