LIQUIP PTY LIMITED - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164
PH: +61 2 9725 9000
FAX: +61 2 9725 1252
EMAIL: [email protected]
Issue: A
15/05/13
Page 5
3.1
Product Delivery – Simple Delivery
1.
Ensure the register shows “0.0” on the display and that a ticket is inserted into the printer (option).
2.
Start the delivery using the nozzle trigger.
3.
When the delivery is complete, press the RESET
button to reset the meter back to zero and print a
delivery ticket. “print delivery” will be displayed on the display when printing the ticket
3.2
Product Delivery – Valves Fitted
1.
Press the START/ STOP
button to start the delivery.
3.3
Displaying or Changing Product Density (LPG ONLY). If enabled in calibration mode.
This function is only available if the register is set for litres and the function is enabled.
1.
Press the TOTAL
button five times in five seconds.
2.
The density value is then displayed.
Note: If no button is pressed for five (5) seconds, the DFV will exit and return to standby mode.
Changing Product Density
1.
Ensure the current density is displayed (see above).
2.
To change the current density, use the TOTAL
and RESET
buttons.
Press the TOTAL
button to increment the value of the current digit and RESET
button to move to the
next digit.
The density range must be between 0.500 – 0.600 for LPG.
3.
Press the START/STOP
button to set the value.
3.4
Displaying or Selecting the Product (NON-LPG and special versions
only). If enabled in calibration mode.
This function is only available for some special versions of the register and only for NON-LPG products.
1.
Press the TOTAL
button five times in five seconds.
2.
The product name is then displayed.
Note: If no button is pressed for five (5) seconds, the DFV will exit and return to standby mode.
Selecting the Product
1.
Use the
TOTAL button to select the product.
2.
Press the START/STOP
button to accept it.
3.5
Displaying the Meter Number
