7
ORDER OF INSTALL
1.
Secure mounts
2.
Test Hang TV
3.
Remove TV
4.
Install Frame
5.
Connect Inputs and Power
6.
Hang TV
TELEVISION INSTALLATION TASKS
1.
Determine desired installation location
Consider the information provided in the location recommendation.
2.
Ensure power supply is within 1m of your desired installation location
If a power point is required to facilitate installation, please refer this work to
a licensed electrician. For an install where no power or input cables are
visible, a wall access point should be installed directly behind the input
panel at the rear of the television.
3.
Verify that the rough opening is to required dimensions for your
television (Not applicable for surface mounting)
The size of the recess is dependent on the model and size of the television
you have purchased. Dimensional information is available at
www.liquifi.cm.au
4.
Install mounting brackets
Mount the brackets to a secure reinforced wall section, such as frame studs
in a brick veneer home. The mounts need to be a specific width apart to
allow the TV to hang between the left and right mount.
The distance between the centre bolt hole of the left bracket, to the centre
bolt hole of the right bracket is
1170.6mm
. See Diagram overleaf.
Summary of Contents for Lifestyle LWB-47MBE
Page 1: ...1300 699 788 info liquifi com au Lifestyle Series LWB 47MBE INSTALLATION GUIDE...
Page 9: ...9...
Page 11: ...11...
Page 17: ...17 NOTES...
