4
WWW.LCMETER.COM
LC-ON THE GO
TM
Wireless WiFi Adapter
Follow this Quick Start Guide to
get your unit up and running fast.
The LC-ON THE GO
TM
WiFi Adapter contains
the following items: wireless WiFi module and
antenna. It requires a lap-pad adapter 81514
(single meter systems) or multiplexer box
E25352 (dual meter systems.
1. Install antenna onto the Wireless WiFi
module.
2. Plug the DB9 connector into the lap pad
adapter or the RS-232 Lap Pad female
DB9 connection on the multiplexer.
The WiFi adapter will receive power through the lap
pad adapter or the multiplexer box. The green light
on the adapter will illuminate when power is applied
to the register.
3. Go to Settings or Wireless Network
Connections to find the wireless SSID on
your Apple or Android wireless device, or
laptop computer.
Search for available WiFi networks. With power to
the adapter, the wireless module will broadcast its
own unique SSID. The default SSID is XpicoWiFi_
xxxxxx, where xxxxxx are the last six characters of
the unique xPico Wi-Fi serial number on the back
of the adapter. For example, if the serial number on
the label is 0080A3AO7AA0, then the SSID would
be xPicoWiFi_AO7AA0. Click on the XpicoWiFi
SSID link to display the connect screen.
Note: The SSID can be customized by the user. (See
section 5. Entering the Liquid Controls Configuration
Mode.
Also required (sold separately):
Lap pad adapter (81514) for single meter system
OR
Multiplexer box (E25352) for dual meter system
I. BASIC SETUP
