TME-EPIC-HURLX-R3V5.docx
Rev 3.5
Page 19 of 49
3.7
PS/2 Keyboard / Mouse Interface
Connector type:
PS/2
Matching connector:
PS/2 – Mouse – Connector (P2, above)
Mini-DIN 6-pin male
Pin
Signal
1
Mouse Data
2
NC
3
GND (Power Supply Mouse)
4
+5 Volts (Power Supply Mouse)
5
Mouse Clock
6
NC
PS/2 – Keyboard – Connector (P2, below)
Pin
Signal
1
Kbd Data
2
NC
3
GND (Power Supply Kbd)
4
+5 Volts (Power Supply Kbd)
5
Kbd Clock
6
NC
3.8
USB 2.0 Ports
4 standard USB 2.0 host ports are provided at the I/O panel of the Hurricane LX800.
It is possible to use an USB keyboard under MSDOS without special driver software
1
Port 3 can be used as USB device port. This feature must be enabled in BIOS under PCI Bus. UDC must be
enabled; Port 3 assignment should be set to device.
.
The connectors are located below the Ethernet ports (see Chapter 3.5)
1
Note: not all keyboard models are supported.