background image

CURTMFG.COM.AU

  

  

NEED ASSISTANCE?

  

  

877.287.8634

  

  

45940-85-INS-RD

  

  

PAGE 1

Maintenance

Mild automotive detergent may be used to 

clean the product. Do not use dish detergent, 

abrasive cleaners, abrasive pads, wire 

brushes or other similar products that 

may damage the finish.

Apply grease to the zerk located on the back 

of the shank assembly prior to each use to 

ensure quiet and trouble-free operation.

Weight Capacity

Gross trailer mass

4500 kg

Tongue mass

450 kg

INSTALLATION MANUAL

45940-85

Tools Required

None

Product Photo

Level of Difficulty

Easy

 WARNING

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of 

the mount system are intended to represent the capability of the product and in no way 

reflect the ratings or capacity of the towing system it is being used with. The consumer 

or operator are strongly advised to learn the ratings of the various components of the 

towing system and never exceed the limits of the lowest rated component being used.
Use of any pin other than that of the mount system manufacturer 

could be a serious safety hazard and will void the warranty.
Check for proper clearance of the trailer coupler to the tongue of the Rebellion

 XD when 

latched on the ball. Some couplers may require a 1" rise ball to add clearance for maneuvering.
Never hook up trailer safety chains to the mount system. Ensure the safety 

chains operate freely around the mount system and do not become entangled.

 DANGER

Cannot be used in the rise position.

Parts List

Item Qty Description

1

1

Adjustable shank*

2

1

Trailer ball platform

3

2

Pin*

4

2

Clip*

*Shank, pin and clip not included

NOTICE

Visit 

www.curtmfg.com.au

 for a full-color copy of this 

instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed 

to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified 

torque specifications when securing hardware during the installation process.
Prior to towing, ensure all fasteners are tight and all structural components are sound. Using 

a torque wrench and 3/8" hex drive socket, torque hardware to 45-55 lb-ft. (61.0 - 74.6 Nm.)

Product Registration

CURT Group stands behind our products 

with industry-leading warranties. Provide 

feedback and help us to improve our 

products by registering your purchase at: 

curtmfg.com.au/registration

Reviews: