background image

7

lippert.com 

    432-LIPPERT (432-547-7378)    

 

Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Fixed Push Bar Installation

These steps detail how to install the fixed-style push bar to 

the inside of the door frame.

NOTE: 

Be sure to install two Parts List E sleeves 

(Fig.19)

.  

See the Mounting Options section on page 3 

(Fig. 4).

 

NOTE: 

Choose one of the following methods to install the 

sleeves to the push bar.  The standard method begins here 

and the alternate method begins on page 8.  Both methods 

for installing the sleeves to the push bar will utilize the 

same method for mounting the completed bar to the door.

Sleeve to Bar Installation (Standard Method)

1. 

On both sleeves, insert  the ball of the sleeve into the 

pocket of the mount bracket 

(Fig.18)

.

2. 

Slide the sleeves over the ends of the push bar 

(Fig. 19)

ball

pocket

mount bracket

back view shown 

to depict ball

Fig.18 

Fig.19 

mark

Fig.20 

center of raised portion of  

screen door frame 

5. 

Move the assembly to a stable work surface and 

measure from the ends of the push bar to each mark made 

previously in step 4 

(Fig. 21A, Fig. 21B)

.

6. 

Add these measurements together, then divide that 

sum by 2.  Then, using a non-permanent marker, make 

new marks on each end of the push bar equal to this new 

number. 

Example:

 If measurement 

(Fig. 21A)

 = 1 

1/2

” and 

measurement 

(Fig. 21B)

 = 3”, Adding them equals 4 

1/2

”. 

Then, 4 

1/2

” divided by 2 equals 2 

1/4

”.  Re-apply marks on 

each end of the bar at 2 

1/4

”.

NOTE: 

This centers the push bar between the sleeves, 

ensuring that there is an equal amount of bar for strength 

inside each sleeve.

3. 

From inside the screen door, dry fit the assembly to 

the door’s width. Align the mount brackets 

(Fig.20)

 on both 

sides of the screen door so that the bar rests parallel to the 

frame of the door.  Each sleeve mount bracket should be 

centered vertically on the raised portion of the door frame. 

(Fig. 20)

.

4. 

Mark the push bar dimensions using a non-permanent 

marker 

(Fig.20)

.

measure

measure

marks

Fig.21 

parts list E

 A

B

Summary of Contents for 2021000090













Reviews: