4
lippert.com
432-LIPPERT (432-547-7378)
Rev: 10.13.21
Screen Assist
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004313
Fig.7
ball
mount bracket
back view shown
to depict ball
Sleeve to Bar Installation (Standard Method)
1.
Insert the ball of the non-lever side sleeve into the
pocket of the mount bracket
(Fig.7)
.
2.
Slide the sleeves over the ends of the push bar
(Fig. 8)
Fig.5
Fig.6
screw cover
original inside lever handle
push bar inside lever handle
Lever Handle Push Bar
Installation
These steps detail how to install the lever-style push bar to
the inside of the door frame.
Removing Original Lever Handle
Prior to the installation of the lever handle push bar, the
original lever handle must be removed and replaced with
the shorter push bar lever handle that fits into the receiver
sleeve.
1.
Using a small flat blade screwdriver, remove the
screw cover on the original lever handle on the inside of
the door
(Fig.5)
, then remove the screw.
2.
Remove the original inside door lever handle
(Fig.5)
.
3.
Install the new push bar lever handle on the inside of the
door, noting the location of the insertion line
(Fig.6)
. Hold
the lever handle on the opposite side to keep it from falling
out while installing the new lever handle.
4.
Reinsert the screw and tighten, then install the new
screw cover.
screw
cover
3.
From inside the screen door, dry fit the assembly to the
door’s width. Insert the lever side sleeve up to the insertion
line
(Fig.6)
on the inside push bar lever handle
(Fig.9)
and
align the mount bracket
(Fig.7)
on the door hinge side so
that the bar rests parallel to the frame of the door.
4.
Mark the push bar dimensions with a non-permanent
marker
(Fig.9)
.
insertion
line
Fig.9
Fig.8
mark
center of raised portion of
screen door frame
insertion line
NOTE:
Choose one of the following methods to install the
sleeves to the push bar. The standard method begins here
and the alternate method begins on page 5. Both methods
for installing the sleeves to the push bar will utilize the
same method for mounting the completed bar to the door.
parts list F
parts list E
