9
574-537-8900
Rev: 05.01.20
Tire Linc
®
Tire Pressure & Temperature
Monitoring System 2.0
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0003848
Operation
When Stem Sensors are under pressure, data is
transmitted to the repeater, when tires are:
• moving/rotating, every one minute;
• not moving/not rotating, every 15 minutes.
1.
If using the LCI OneControl app
(Fig.4)
, for either an iOS
or Android smart phone
(Fig.5)
, do as follows:
A.
Tap the OneControl icon
(Fig.5A)
to launch the app.
B.
The app will automatically detect the Tire Linc system.
NOTE:
If necessary, follow the online prompts to set up
Tire Linc within the OneControl app.
2.
The smart phone will connect to the repeater and the
app will display a trailer image with tire pressures and
temperatures
(Fig.16)
.
NOTE:
Figure 16 shows tire pressures and temperatures
within the specification ranges for the left front tire while
figure 17 shows the tire is outside specification ranges.
3.
With the OneControl app running, real-time tire event
notifications will be sent to the smart phone.
4.
Tap the notification to be taken to the TPMS screen in
OneControl to visually see which tire(s) is/are experiencing
an event.
5.
Tap the readout button
(Fig.16A)
of a tire to launch
its properties window
(Fig.18)
. Within the selected tire’s
properties window, various tire and sensor specifications
can be observed and altered.
A. Last data received
—
posts the date and time the app
last received tire monitoring system information.
B. Pressure
—
posts the currently sensed pressure of
the selected tire.
C. Temperature
—
posts the currently sensed
temperature of the selected tire.
D. Battery Level
—
posts the current battery voltage of
the sensor’s battery.
E. Low/High Pressure Threshold
—
posts the
currently programmed low and high pressure limit for the
selected tire.
Fig.16
Fig.17
A
