Lippert Components SolidStep 3.0 Lift Assist, Oem Installation Manual, Page: 2 / 8

Rev: 07.18.18
Page 2
CCD-0001653
System Information
The SolidStep® 3.0 is a trailer entry step assembly that can be mounted to the side of any trailer, providing
an ease of entry, regardless of level ground. The suggested floor height range should be between 35-44" for
a 4-step tread and 27-36" for a 3-step tread.
Safety Information
The step assembly was designed for an operational weight rating of 400 lbs.
TABLE OF CONTENTS
System Information 2
Safety Information 2
Resources Required 3
Prior to Installation 3
Installation 3
Place Assembly Inside Doorframe 3
Adjust Transport Lock
4
Secure Hinge Plate 5
Attach Strut
6
Operation 7
Adjust Leg Extensions 7
Moving parts can pinch, crush or cut. Keep clear and use caution.
No repairs should be attempted by anyone other than a qualified professional. The deployment and
retraction of the step assembly can cause injury if proper precautions are not taken.
Always wear eye protection when performing service or maintenance to the trailer. Other safety
equipment to consider would be hearing protection, gloves and possibly a full face shield, depending on
the nature of the service.
Failure to follow the instructions provided in this manual may result in death, serious injury, trailer
damage or voiding of the component warranty.