Rev: 08.31.20
Page 19
CCD-0002697
Loading Configuration
1.
Insert programmed thumb drive into the USB port of the OneControl Touch Panel (Fig. 69).
2.
A dialogue box will ask whether to save or load the configuration (Fig. 70). Press LOAD (Fig. 70A).
NOTE:
If the box doesn't pop up automatically, it can be accessed by pressing the menu bars in the top left
corner beside All Devices (Fig. 70B).
3.
Wait a few moments while the configuration is loading (Fig. 71).
4.
The loading is completed when Done appears in the bottom left-hand corner of the box (Fig. 72A).
NOTE:
A file extension is automatically added to the file name so the file appears as floor plan.configV2.
5.
Remove thumb drive.
Fig. 69
Fig. 70
Fig. 71
Fig. 72
A
A
B
