Lippert Components MyRV Programming Manual Download Page 3

Rev: 05.19.2016

Page 3

MyRV™ Programming Manual

Programming

Connecting The MyRV™ Tablet To The MyRV™ Wireless Network

NoTe: 

Tablet

 MUST 

be connected to MyRV™ Wifi Hub to complete the programming process. Placing the 

hub in a high location away from appliances such as microwaves and refrigerators will minimize 
interference. 

1. 

On the MyRV™ home page, select “Apps & Internet.”

2. 

On the "Apps and Internet Browser," select the “WiFi Manager.”

3. 

Locate the MyRV™ Hub (Fig. 1) or Range Extender (Fig. 2) and the label which contains the SSID and 

password to the MyRV™ system.

4. 

Match the SSID on the MyRV™ Hub or Range Extender (Figs. 1A and 2A) to the corresponding SSID in 

the "Wifi Manager."

5. 

Select the SSID and enter the password located on the MyRV™ Hub or Range Extender (Figs. 1B and 2B)

then press "Connect."

NoTe: 

In order to charge the tablet out of the dock, a 5 volt, 1.8 amp micro USB charger or barrel charging 

connector is needed.

A

B

Docking Station

The MyRV system includes a tablet docking station.  This is typically mounted near the center of the coach, and 

houses the tablet when the wireless operation is unnecessary or during travel.  The docking station is wired to 

the coach power system and will charge the tablet during its storage period.  The docking station is also wired for 

communication with the various controllers in the coach.  This allows the tablet to function when stored in the dock 

and becomes non-reliant on the wireless hub to do so. 

Wireless Hub and Range Extender

The MyRV system is equipped with a wireless hub and range extender.  When powered, the hub and range 

extender provide the perimeter of the coach with wireless connectivity.  This allows the tablet to effectively send 

commands wirelessly to the MyRV system. The hub's and range extender's only purpose is to provide wireless 

connectivity.  The hub and range extender do not keep configuration data, so when troubleshooting wireless 

connection concerns, ensure the tablet can operate the MyRV Control Panel when housed in the docking station.  

Again, as long as there is power to the coach, the MyRV system should operate from the dock.

A

B

Fig. 1 

Fig. 2 

Summary of Contents for MyRV













Reviews: