Rev: 05.19.2016
Page 2
MyRV™ Programming Manual
Safety and System Information
System Information
The MyRV™ tablet is an Android-based device that uses the MyRV™ application to bring system controls and
monitoring software to a touchscreen tablet. The MyRV™ tablet can access the internet (if available), basic how-
to RV videos, product videos, owner's manuals and many more RV owner's resources. The systems controlled
and monitored by MyRV™ include slide-outs, leveling systems, awnings, lighting, temperature, water tanks, tire
pressure, battery levels and many more.
The MyRV Control Panel is accessed within the MyRV application on the tablet. When powering on or waking
the tablet, the MyRV application will run automatically as it is pre-configured to do so. In order for the MyRV
application to present the operator with the MyRV Control Panel, there
MUST
be power to the coach. This will
power the various MyRV controllers located throughout the unit. This will also power the wireless hub and enable
connectivity with the tablet, ultimately allowing wireless connectivity. Please note that with power to the coach,
the tablet should always be able to gain access to the MyRV Control Panel when placed in the docking station due
to it being a wired connection. Use this to assist when diagnosing concerns with the system.
NoTe:
After powering up the RV, it may take several minutes (2-5) for the MyRV™ tablet and MyRV™ Hub to
fully energize and communicate. Please allow this time for the system to establish communications
to ensure swift application operations.
TABLE OF CONTENTS
Safety and System Information
2
System Information
2
Programming
3
Connecting The MyRV™ Tablet To The MyRV™ Wireless Network
3
Docking Station
3
Wireless Hub And Range Extender
3
MyRV™ Functions
4
Circuit Building For MyRV™ Smart Switch
5
Multifunction Fuse Programming
7
operation
9
Power On/Off
9
Volume Button
9
MyRV™
10
Notes
11