Rev: 11.27.19
Page 7
CCD-0002710
Room Stop Adjustment
Adjust the room to desired location as follows:
1.
For "out" stop (Fig. 5A) and/or "in" stop (Fig. 5B) adjustment, use a 3/16" hex wrench to loosen the
stop's set screw (Fig. 5C) on the stop block (Fig. 5D).
2.
Adjust the stop blocks to desired location.
3.
Tighten the set screws.
Fig. 5
A
Top View of Stop Blocks
Bottom View of Stop Block
B
C
D