9
432-LIPPERT (432-547-7378)
Rev: 06.01.22
Lippert Temperature
Sensor
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004546
Battery Information
Follow battery warning information and the warnings in
this manual. The sensor comes with a BR-2450 coin cell
battery. This battery is rated for refrigerators and freezers.
NOTE:
If only used in a refrigerator or to measure
temperature in a room, a CR-2450 battery can be used.
Only use new batteries and of identical type. Do
NOT
:
• Throw batteries into water.
• Throw batteries into fire
• Short-circuit batteries.
• Open or disassemble batteries.
WHEN HEATED ABOVE 100 °C (212 °F) THE RISK OF
RUPTURE OCCURS. A RUPTURED BATTERY CAN
EXPOSE ITS CAUSTIC CONTENTS TO EYES, LUNGS
AND SKIN CAUSING SEVERE PERSONAL INJURY.
IF EXPOSED TO BATTERY CONTENTS, SEEK
IMMEDIATE MEDICAL ATTENTION.
Resources Required
• BR-2450 or CR-2450
battery (depending)
•
Small, flat-head
screwdriver
NOTE:
Complete removal of the sensor should not be
necessary. The best practice is to NOT remove where the
sensor is adhered and keep adhesive attached.
1.
Pull the senor out of the mounting rubber band (
Fig.17
).
2.
Locate the slot on the bottom corner of the Temperature
Sensor (
Fig.18A
) Insert a small, flat-head screwdriver and
twist to open.
Fig.17
Fig.18
A
NOTE:
Instead of a screwdriver, a slim coin can be used.
3.
The sensor will pop open like a clamshell (
Fig.19
).
Fig.19
USE CARE WHEN REMOVING OR INSERTING
THE BATTERY. DO NOT USE SHARP OBJECTS
TO REMOVE, INSERT OR HANDLE THE BATTERY.
SHARP OBJECTS CAN CAUSE DAMAGE TO THE
BATTERY THAT MAY RESULT IN ITS RUPTURING. A
RUPTURED BATTERY CAN EXPOSE ITS CAUSTIC
CONTENTS TO EYES, LUNGS AND SKIN CAUSING
SEVERE PERSONAL INJURY. IF EXPOSED TO
BATTERY CONTENTS, SEEK IMMEDIATE MEDICAL
ATTENTION.
