10
432-LIPPERT (432-547-7378)
Rev: 06.01.22
Lippert Temperature
Sensor
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004546
4.
Lift out the sensor platform and slide out the old
battery (
Fig.20
).
5.
Install the new battery (
Fig.21
).
NOTE:
Make sure the positive side of the battery faces up.
6.
Put the platform into the transparent tray (
Fig.22
).
Fig.21
Fig.22
Fig.23
Fig.24
7.
Snap the top of the sensor body back into place (
Fig.23
).
NOTE:
If the sensor was On/Sleep mode before battery
was replaced, the sensor will return to that mode when
the new battery is installed. If the sensor was Off before
replacing the battery, then it will be necessary to turn on
the sensor and complete the install/set-up process.
Fig.20
8.
Open the app and wait until the app and the sensor sync.
NOTE:
Lithium button cell batteries are classified by the
U.S. federal government as non-hazardous waste and
are safe for disposal in normal municipal waste systems.
Lithium button cell batteries are classified differently in
other countries wherein battery disposal must follow in
accordance with their respective local laws.
9.
Return the sensor back to the rubber band (
Fig. 24
).
