background image

Operating manual LL12                             2/18                                       Version 1.6        (01/2017)

EU declaration of conformity for machines

(EU machinery directive 2006/42/EC)

The manufacturer

                        

Lippe Lift- und Anlagenbau GmbH
Weststrasse 48, D-32657 Lemgo,

hereby declares that the following machine

Inclined stair lift / platform lift / type LL12

 conforms to all stipulations of the directive named above

 conforms to the stipulations of the following additional directives:

    EMC directive 2014/30/EU
    Low-voltage directive 2006/95/EC

 The following harmonised standards were applied or their protective goals were attained:

EN 81-40 (2009)

EN 349 (2008)

EN ISO 12100 (2010)

EN ISO 13850 (2007)

EN ISO 13857 (2008)

EN 60204-1 (2007)

The following notified body: TÜV AUSTRIA SERVICES GMBH (IDF no.: 0408) was employed 

for:
     EU type testing, test report no..: TÜV-A/MHF/MG 13-05307

Responsible for the documentation: Lippe Lift- und Anlagenbau GmbH (Documentation Dept.)
                                                       Weststrasse 48, D-32657 Lemgo

Lemgo, 03/09/2009

              

_______________________

    F.-W. Mueller (Managing Director)

Summary of Contents for LL12



















Reviews: