Instructions
Flail mower ME 70/80/90/104/120/140..L
14 - 40
110725-E-03-EN BA ME-70-80-90-104-120-140-L / 05/11/2019
The
LIPCO ME
can oscillate +/- 3 degree to adapt to uneven
ground. To allow this oscillation, the machine flange (B) has two
slots, in which both set screws (C) engage.
If this oscillation is not desired, this function can be bridged via a
lateral clamping screw (E).
To bridge this function, turn the screw (E) in until you feel re-
sistance. Then secure the screw with the lock nut.
9. Application instructions
•
In order to achieve a uniform mulching result, the Flail mower
must roll on the roller or on the supporting wheels during the
mulching work.
Warning:
When working with the Flail mower in a lifted position, there is a
risk due to falling rocks.
•
When working close to streets, paths or residential areas, you
have to work with particular caution!
Never work without stone guard! (Fig. 2)
Rear stone guard
Front stone guard
Fig. 2
•
For your own safety, you should always wear safety shoes and
safety goggles while working.
Summary of Contents for ME 104 L Series
Page 40: ...40 40 Design mail bauer ib com...