Instructions
Hydraulic shaker HSA 30
4 - 32
220074-01-EN BA HSA 30 / 28.09.2019
3. Designated use
The
LIPCO hydraulic shaker HSA 30
, when connected to a tractor, is
designed for hydraulic shaking of fruit and other crop trees.
Because of his modularly design, the
LIPCO hydraulic shaker
can be
used for front and rear attachment.
Any other use for purposes other than those described here is not
according the designated use. Do not held the manufacturer liable
for damage resulting from such use; the risk for such use lies entirely
with the user.
Operating the unit within the limits of its designated use also means
following the instructions for operation, transport and maintenance
described by the manufacturer.
Persons who are familiar with the unit and informed about possible
risks must carry out any work, maintenance and repair on the
LIPCO
hydraulic shaker HSA 30.
Please observe the relevant accident prevention regulations as well
as the other generally recognized maintenance, safety, industrial
medicine and road traffic rules and instructions.
The manufacturer cannot held liable for damage resulting from unau-
thorized modifications of the
LIPCO hydraulic shaker HSA 30.
•
Note for use on public roads
Before driving on public roads and paths, make sure that the
combination of tractor and
LIPCO hydraulic shaker HSA 30
or
other combined equipment complies with the applicable traffic
regulations (maximum gross weight, maximum axle loads, lights,
warning signs, etc.). It may be necessary to transport the
LIPCO
hydraulic shaker HSA 30
on a flatbed truck.
•
Note
The
LIPCO hydraulic shaker HSA 30
is also referred to in this
operating manual only as
LIPCO-HSA
.
