Operating instruction
Saddle-mount fan unit with tank trailer GSG-AN-VM
10 - 72
011170-05-EN BA GSG-AN-VM / 2019-01-16
5. Accident prevention
Failure to comply with the simplest basic rules are causing
most accidents occurring during use, maintenance or transport.
Therefore, it is important that all persons involved with use of the
machine are aware of and comply with the following rules:
•
In order to achieve maximum performance from the
GSG-AN-VM
it must be in proper working condition.
Perform maintenance and repair only by trained people.
•
Replacement parts must fulfill the minimum technical specifica-
tions required by the manufacturer! Only use of
LIPCO original
replacement parts
will fulfill these requirements.
•
Before each use, check the trailer hitch bolts on the three-point
mount and all studs and nuts!
•
Exercise special caution when using roads or paths, e.g. for turn-
ing the entire tunnel spray unit.
•
Always shut off the motor and remove the ignition key when per-
forming maintenance or repairs!
•
During work and transport on public road, do not transport ob-
jects or persons on the machine!
•
Operate machine only with drive unit fully protected, i.e. univer-
sal joint shaft completely covered and additional protection on
tractor and
GSG-AN-VM.
Make sure that the universal joint shaft
connections lock securely into place!
•
The machine should be on a level surface or a stable support
during all work on the machine!
When working on the machine in raised position, always secure
by mechanical means using suitable supports!
Summary of Contents for GSG-AN-VM
Page 72: ...Design mail bauer ib com...