Page: 6
GROOVE
LIONSTRACS
OS 5.1
Once the cables are connected, you can switch ON your GROOVE by pressing the key marked "RUN", which is located on the top right-hand
side of the right-hand front panel. To switch OFF the GROOVE, you have two possibilities: you can log out of the system properly or you can
reset the device with a "kill system" command. This can be useful when you're in a hurry and you have to quickly shut down the workstation.
Logging Out
Press the key marked "RUN", which should be the second key in the top right-hand group. You'll see a pop up window on the screen from
which you can select these options:
Reboot the OS linux system
Completely turn off the GROOVE: select this option and wait until the GROVE shut down procedure is completed and the power supply is
disconnected. This is the preferred way of powering off the GROVE .
Cancel and exit the dialog window and return back in the working GROVE OS.
Kill System
Kill System The "kill system" command is activated by pressing and holding the "RUN" key for 4 seconds. This procedure will immediately
switch off the power from the GROVE CPU. This is not the recommended way to close your session, but the Linux operating system can safely
handle this kind of "hard" power off command without problems.
.
Switching ON and OFF the GROOVE
Turn OFF PC
Cancel
RESTART PLAYER-RESET
The RESTART PLAYER is used for reload the whole OS Pla-
yer application, Musltiple ASIO host and so on.
The Restart player is also linked on the GROOVE RESET
Key.
Mode 1: When the RESET key is pressed, will automatically
send the GS sysex ALL midi note OFF, rest CC controller.
Mode 2: When the RESET key is pressed and HOLD for mo-
re 4 seconds, will automatically RESTART the complete
GROOVE application on default setup.
If some mistake in realtime are made and the GROOVE ap-
plication NOT respond correct, just press and HOLD for 4
second the RESET key OR double click on the desktop the
Restart Player icon.
RESTART-PLAYER
Reboot PC
After the Linux operating system has loaded or rebooted, you will see the KDE desktop. Normally the GROOVE Player will start automatically,IF
not, touch the RESTART Player Icon on the desktop and the player will restart again in default mode.