EN
5.
Insert the silicone funnel into the body and put on the edge. Make sure the funnel fits
the edge tight.
6.
Place the breast pump on the base.
HOW TO USE
1.
Before you use the breast pump for the first time, disinfect the elements which contact
milk (milk bottle, body, valve, nozzle and silicone funnel as specified in the manual).
2.
Put the silicone funnel on the breast. Make sure a nipple is located in the middle.
3.
Switch the breast pump on with (
). The screen will display a massage mode sym-
bol (
) and battery status symbol (
).
4.
Press level up (
) or level down (
) to choose a relevant level. There are 10 levels
in the massage mode.
5.
When milk starts coming out, press mode change key (
) to change suction mode (
).
6.
Select a relevant level. There are 15 levels in the suction mode.
7.
When you finish drawing milk, press the on/off switch (
) to turn the breast pump
off. Remove the breast pump from the breast gently.
8.
Unscrew the milk bottle.
9.
Clean the device as specified in the manual.
A suitable and comfortable level is selected on a case-by-case basis and does not depend
on the suction power.
CHARGING
The breast pump has a built-in battery.
1.
When the battery is flat, the battery status symbol will start flashing. Stop using
the breast pump then.
2.
Switch the breast pump off.
3.
Connect the USB cable to breast pump’s USB power outlet and the other end to
the USB feeder.
4.
When charging, the battery status symbol shows charging.
