33
Running your train
Expanding the Maxi-Stack into a unit train
I
f you wish to articulate your Maxi-Stack with additional sets, you will need to add on to the
ends of each set. Refer to Figure 15 on page 35 to help identify the parts.
Do not over-tighten the screws or damage could be caused to the cars and
connectors.
1. Remove the truck from the non-brakewheel end of the Maxi-Stack Set using a 3/16” nut
driver to remove the hex-head screw (labeled “B” in Figure 15 on page 35) from the bottom
of the truck.
2. Remove the Phillips head screw (labeled “C” in Figure 15 on page 35) from the bottom of
the platform. Refer to Figure 13.
Figure 13. Platform removal and connector attachment
Caution!
Female
articulating
connector
Platform
