5
LEGACY Control System operations
The LEGACY CAB-2 Remote Controller
2
1
F
R
Activates CrewTalk.
Toggles the front work
lights on and off.
Toggles the rear work
lights on and off.
Launches the outriggers.
The outriggers launch
sequentially—front, center,
and then rear. Press the
outriggers back in by hand.
Velocity Throttle
Rotates the cab on the
crane, also used to
navigate thru info/options
.
Whistle
Whistle sounds for Crane.
Silences sounds.
Activates sounds.
Rear Coupler Button
Fire coupler on the rear of the
crane.
Front Coupler Button
Fire coupler on the front of
the crane.
Raises and Lowers the Boom
Sounds.
Raises and Lowers the
main hook on the Crane.
Raises and Lowers the
auxiliary hook on the Crane.
Reset
Blow the horn by pulling down on the Warning Sound Controller.
Notice the difference in intensity of the diesel sound.
Quillable Horn
U
se your CAB-2 Remote Controller to activate the sounds and operate the crane. Use the volume
control knob located under the roof to adjust the volume. Refer to Figure 1 on page 3 for the
location of these controls. If you do not want sound, turn the volume control to zero, either turning
the volume knob or pressing the volume key on your remote.
