13
Access Point Mode
A
ccess Point mode creates an entirely new network, with an SSID of “Lionel LCS – NNNN”.
The “NNNN” will represent a unique identifier so that multiple LCS WiFi units may be
utilized on a layout. The “NNNN” represents the last 4 digits of the WiFi Radio MAC address
which is unique to each LCS WiFi module.
To select “ACCESS POINT” mode:
1. If LCS WiFi is connected to a Lionel Command Base, set the “BASE/NO-BASE” switch to
“BASE.” If not, set this switch to “NO-BASE.”
2. Next, slide the “ACCESS POINT / JOIN to NETWORK” switch to “ACCESS POINT”.
3. Now, connect your device to your new, named network: For example, using the “Settings”
app on your iPad®, locate the “Lionel LCS - XXXX” WiFi service, and wait for the
connection to activate.
4. Launch the LCS-aware application to control your layout.
JOIN to NETWORK Mode
I
f your Wireless Router supports “WPS” (WiFi Protected Setup), then you may add LCS WiFi
to your home network. Now your iPad (or other device) can seamlessly access the internet
and run your layout. However, if your home network is busy, you may experience latency
(slower response to your commands) when using the JOIN to NETWORK mode of operation.
To select “JOIN To NETWORK” mode:
1. If LCS WiFi is connected to a Lionel Command Base, set the “BASE/NO-BASE” switch to
“BASE.” If not, set this switch to “NO-BASE.”
2. Next, slide the “ACCESS POINT / JOIN To NETWORK” switch to “JOIN To NETWORK”.
3. Press and hold the “WPS” push button on the LCS WiFi interface for 2 seconds, then press
the “WPS” button on your wireless router. The devices will negotiate a secure connection.
4. Be sure your device is connected to your existing network.
5. Launch the LCS-aware application to control your layout.
If you are using LCS App, you will be prompted to search for the LCS WiFi, after which
the connection will allow the LCS app to control your locomotives and layout. Locating
the LCS WiFi may take as long as 5 minutes the first time, or anytime your home network
configuration changes. Once LCS App connects, the green LED on the LCS WiFi will be solidly
illuminated.
