12
Maintenance and operations
Using .6 Volt rechargeable batteries (not included)
O
pen the battery compartment by sliding the locking tab forward (see Figure 4 on page 7
for location of locking tab) on the top rear of the tender.While holding the locking tab,
pull the tender lid upward. Then slide the lid backward to remove the slot from the retaining
rib. Refer to Figure 4 on page 7.
Place the 9.6 Volt rechargeable battery in the center slot of the large battery compartment
connecting battery power plug into it’s receptacle. See Figure 10.
Close the battery compartment by inserting the slot on the rear end of the tender lid onto
the retaining rib. Then lower the front end of the lid and secure by sliding the locking tab
backward.
The 9.6 Volt battery should be removed from the tender for charging as this produces heat
that could damage your tender.
It should be noted that the battery life of the rechargeable will be significantly less when
using 6 Alkaline ‘C’ batteries.
When using a 9.6V rechargeable battery DO NOT place any ‘C’ batteries
in the lower portion of the battery box. This could result in damage to the
engines electronics.
IMPORTANT!
Figure 10. Using a 9.6 Volt Rechargeable Batteries
.6v batteries must be placed vertically in the
slot provided as shown. Do not lay the horizontally
as this may cause damage to your tender.
IMPORTANT!
Meijer.com
Summary of Contents for Hogwarts Express G Gauge
Page 15: ...15 Notes Meijer com...
