Lionel Hogwarts Express G Gauge, Owner'S Manual

Page: 11 / 16

11
Operation your Hogwarts Express train
Operating your wireless controller
T
urn your Wireless Controller to the ON position by sliding the button on the right side of the
controller up. An LED on top of the dial will light to indicate the power is on. See Figure 8.
The controller must be within 10 feet of the engine to operate the train. The controller
may not operate if placed flat on the ground even if it is near the train.
Forward
Turn the dial towards the green FORWARD position to move the train forward. There are three
speeds forward and the more you turn the dial along the green arrow faster the train will go.
Stop
The red LED also indicates the stop position. Turning the dial to this position will stop the train.
Note that it may take up to several seconds for the train to come to a complete stop depending on
how fast it was going. Make sure to bring the train to a complete stop before changing direction.
Reverse
Turn the dial towards the blue REVERSE position to have the train move in reverse. Again,
there are three speeds in reverse. The more you turn the dial along the blue arrow the faster
the train will go.
Bell
Pressing the BELL button activates the engines bell sound.
Whistle
Pressing the WHISTLE button activates the engines whistle.
Note!
Figure 8. Operating your Wireless Controller
F O
RW
A
RD
RE
VE
RS
E
W
HI
ST
LE BE
LL
F O
RW
A
RD
RE
VE
RS
E
W
HI
ST
LE BE
LL
F O
RW
A
RD
RE
VE
RS
E
W
HI
ST
LE BE
LL
FORWARD
STOP
REVERSE
Meijer.com