CAB-1 numeric keypad table
T
he
3
,
5
, and
6
keys on your CAB-1 can perform several different functions when controlling
your GG1. These functions include:
• Starting up and shutting down the engine sounds, with or without activating the
pantograph.
• Controlling the engine RPM sounds manually ("Manual RPM Mode").
• Controlling the pantograph positions manually ("Manual Pantograph Mode").
If you press
AUX1
immediately before you press the
3
,
5
or
6
button, its function will be
modified. The following table summarizes the functions of these CAB-1 Remote Controller
buttons for your GG1.
Key Command
Pantograph (active only
RailSounds sound system
if locomotive is stopped)
3
No effect
If the RailSounds sound system is shut down,
engine sounds start up. If the RailSounds
sound system is running, engine enters
manual RPM mode and revs up RPM one level.
AUX1, 3
Pantographs move to
(same as above)
prototypical position.
5
No effect
If locomotive is stopped, engineer announces
"shut down," engine sounds turn off. (If the
locomotive is moving, see page 17.)
AUX1, 5
Pantographs move to "down"
(same as above)
position.
6
If the locomotive is stopped,
If the locomotive is moving, engine enters
cycle pantographs to next
manual RPM mode and revs down RPM
position if pantograph manual
one level.
mode is active, otherwise no
effect. (See page 25.)
AUX1, 6
Pantographs enter manual
(same as above)
mode and cycle through
positions (See page 25.)
24
TrainMaster Command Control operations
