19
T
he Odyssey System is automatically active when you operate your locomotive in
conventional (non-Command Control) mode, as long as the Odyssey switch is in the ON
position (see Figure 1 on page 7). This means that your locomotive will maintain a constant
speed, compensating for grades, loads, and turns. Simply use your transformer’s throttle to
adjust the speed of your locomotive. If you would like to deactivate the speed control feature,
slide the Odyssey switch to the OFF position while the locomotive is not in motion.
In conventional operation, the lights in the locomotive are connected directly to
track power. Do not exceed 16 volts for extended periods. Doing so will reduce the
life of your lamps.
Because of the way that speed control operates in conventional mode, you will notice
a slight delay between adjusting your transformer throttle and the change in the
speed of your locomotive. If you desire instantaneous response to throttle changes,
turn off the Odyssey System.
Odyssey System operations
Odyssey System conventional (transformer) operation
The Odyssey System
T
he Odyssey System is “cruise control” for your locomotive. Once the speed is set (see below),
your locomotive will maintain a constant speed, no matter what loads the locomotive pulls
or what grades you have on your layout. This digitally-controlled system also allows for
extremely slow movement that will amaze any “scale” enthusiast.
Caution!
Note!
