manualshive.com logo in svg

Lionel Cascade series, Owner'S Manual

The Lionel Cascade series offers a range of high-quality owner's manuals for various products. Easily accessible, you can download these user manuals for free from our website. With a focus on providing comprehensive instructions and support, these manuals ensure a smooth experience with your Lionel Cascade product.

Share
Download
background image

Cascade Range Logging Train Set Inventory

• 0-6-0 dockside locomotive
• Three log dump cars
• Square window caboose
• CW-80 Transformer with accessory wire
• Two straight FasTrack track sections
• Eight curved FasTrack track sections
• Uncoupling track with half straight section
• One straight FasTrack terminal track section
• Smoke fluid
• Replacement traction tire
• Owner’s Manual

3

Table of contents

Creating your layout

Operating your CW-80 Transformer safely

4

Building your Lionel layout

5

Joining the FasTrack track sections

5

Wiring your CW-80 Transformer

6-7

Running your train

Running your train set

8

Operating the Uncoupling Track section

8

Adding smoke fluid to your locomotive’s smoke generator

9

Uncoupling your locomotive

9

Experiencing the features of the CW-80 Transformer

10-11

Locking your locomotive into a single operational state

12

CW-80 Transformer operation

Powering your layout with the CW-80 Transformer

13

Setting the accessory output

14

Maintaining and servicing your set

Lubricating your locomotive

15

Replacing the traction tire

16

Replacing your locomotive’s lamps

16

Loading the log cars

16

Unloading the log cars

16

Replacing your Square Window Caboose lamp

17

Advanced connections: powering two isolated blocks with two transformers

18

Troubleshooting

19

Limited Warranty/Lionel Service

20

Summary of Contents for Cascade series





















Reviews:

No comments

Related manuals for Cascade series

Brands by name

Popular brands

Load more brands