manualshive.com logo in svg

Lionel Cascade series, Owner'S Manual

The Lionel Cascade series offers a range of high-quality owner's manuals for various products. Easily accessible, you can download these user manuals for free from our website. With a focus on providing comprehensive instructions and support, these manuals ensure a smooth experience with your Lionel Cascade product.

Share
Download
background image

17

Maintaining and servicing your set

Window
tab

Window shell

End frame tab

End frame
tab

Hinge

Lamp no. 600-8352-311

Replacing your Square Window Caboose lamp

Figure 10. Caboose lamp replacement

D

uring the course of normal operations, the lamp inside your caboose may require
replacement. Follow these steps and refer to Figure 10.

1. Lift off the roof from the window shell and body. 
2. Pull out the end frame tab from the slot formed by the caboose body and roof. The end

frames are hinged at the platform to swing outward, away from the body. 

3. Remove the window shell. To remove the window shell, carefully bend the sides of the

caboose outward while pulling up on the window shell until the tabs are released from the
windows. 

4. Pull the lamp straight up and out of the socket. Replace it with Lionel lamp no. 600-8352-311,

available at your authorized Lionel Service Center or Lionel Service.

5. Lower the window shell back into the body, making sure that the tabs snap into the win-

dows. 

6. Reposition the roof above the window shell and body, fit the tabs on the end frames into

the corresponding slots in the body, and press down the roof to secure the end frame tabs.

Summary of Contents for Cascade series





















Reviews:

No comments

Related manuals for Cascade series

Brands by name

Popular brands

Load more brands