9
T
he functions of your locomotive's switches are outlined below. Refer to Figure 8 for the location
of the switches.
The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and sets.
Figure 8. Locomotive switch locations
Locomotive basics
Locomotive switch locations
Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation when the
switch is in the PGM position. Also used to “lock” your locomotive in a single direction, or neutral,
in conventional operation when the switch is placed in the PGM position.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System on and off.
Smoke Unit Switch
Used to turn the smoke unit on and off. This switch is "read" by your engine at start-up only.
Switching it after start-up will have no effect.
Auxiliary Smoke Unit Switch
Used to turn the whistle steam smoke effect on and off. For more information, see page 8.
Switches located
under the removable
dome cover
PGM RUN
NO ODY ODY
NO SMK SMK
NO SMK SMK
MAIN
AUX
