Certificate
Project
Figure No.
Version A
2
SAFETY INSTRUCTIONS
Read all instructions carefully before operating your warming drawer
Important:
Observe all governing codes and ordinances.
It is the customer’s responsibility:
To contact a qualified electrical installer.
To
as
sure that the electrical installation is adequate and in conformance with National
Electrical Code- ANSI/NFPA 70-latest edition and all local codes & ordinances.
You must have:
A. 120-volt, 60Hz, AC-only, 15-or 20- amp fused electrical supply.
B. outlet located in the cabinet as close as possible to the warming oven.
We recommend:
A. a time-delay fuse or circuit breaker.
B. a separate circuit serving this appliance only.
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrician determine that the ground path is adequate.
Copies of the standards listed may be obtained from:
*National Fire Protection
Association 1 Batterymarch Park
Quincy, MA 02169
For your personal safety,
this appliance must be grounded. This is equipped with a
power supply cord having 3- prong ground plug. To minimize possible shock hazard, the
cord must be plugged into a mating 3-prong ground- type outlet, grounded in accordance
with local codes and ordinances. See Figure 1. If a mating outlet is not available, it is the
personal responsibility and obligation of the customer to have a properly grounded
3-prong outlet installed by a qualified electrician.
Warning –
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman. If you are in doubt as to
whether the appliance is properly grounded. Do not modify the plug provided with appliance