R.A.C.E. STATION
™
12
WWW.LIONPROTECTS.COM
8.1.3 USING ELECTRICAL CUTOFF WITH A BULLSEYE
™
DIGITAL FIRE
EXTINGUISHER TRAINING SYSTEM OR ATTACK
™
DIGITAL FIRE
TRAINING
SYSTEM
1.
Setup your BullsEye
™
Digital Fire Extinguisher Training System or ATTACK
™
Digital Fire
Training System as instructed in the provided User Manual
2.
Setup your Electrical Cutoff prop and your LION Network Bridge adapter according
to the operating instructions in section 8.1.1, with special care to ensure that the
Network Bridge is within 10 meters of the ATTACK
™
or BullsEye
™
Panel.
3.
Start a training evolution of an electrical fire on the BullsEye
™
or ATTACK
™
. You will
notice the arcing sounds of the electricity during the evolution. The fire will be very
difficult or impossible to extinguish in this state.
4.
Simulate an electrical disconnect using your Electrical Cutoff prop and observe
that the arcing sounds diminish, indicating that the primary fuel source for the fire
has been removed. At this stage, the evolution can be completed as normal for a
combustible materials fire, and the fire can be extinguished.
8.1.4 USING THE R.A.C.E. STATION
™
WITH A BULLSEYE
™
DIGITIAL FIRE
EXTINGUISHER TRAINING SYSTEM
1.
Follow the setup instructions as detailed in starting in section 8.1.1 and be sure to
setup the LION Network Bride Adapter as detailed.
2.
Setup your BullsEye
™
as instructed in the BullsEye
™
user manual.
3.
The system should now automatically connect to and integrate with the BullsEye
™
.
This will add new training features to your BullsEye
™
training interface, as detailed in
the BullsEye
™
Extinguisher Training System user manual.
