Explo Trainer
User’s Manual
Version 1.1 | 18/06/19
Page 13
Charging
-
Connect unit’s charger connector (7) to the battery charger and plug the wall adaptor in the wall
outlet.
If the device was powered on, it will be switched off electronically. The front green charging indicator (3)
will start blinking. When the battery is full, the charging indicator lights continuously.
When a battery is completely empty before recharging, the device will start a trickle charge cycle to
prevent battery damage. The green charging indicator will immediately light continuously. Leave the
charger connected, the charger will recover the battery in a safe way. After approximately four to six
hours, the battery will be fully charged.
A normal full charging cycle will take approximately 4 hours.
The charging circuit continuously monitors the battery status and switches to trickle charge when the
battery is fully charged.
