background image

–     –

–     –

6

7

Labeling / Instruction Requirements

The transmitter has been pre-certified for FCC Part 15 and Industry 
Canada license-exempt RSS standards for an intentional radiator. The 
433.92MHz version has also been tested for CE compliance for use in 
the European Union. The 418MHz version is not legal for use in Europe. It 
has already been labeled in accordance with FCC, Industry Canada and 
CE regulations. No further labeling of the unit is needed; however, it is 
necessary to include the following Instruction to the User statement in the 
end product’s instruction manual or insert card. 

Europe requires that the final product's instruction manual be provided in 
the end user's native language. 

INSTRUCTION TO THE USER

This device complies with Part 15 of the FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation of this device is subject to the following two 
conditions:

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference 

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.

• 

Consult the dealer or an experienced radio / TV technician for help.

The user is cautioned that changes and modifications made to the equipment without 

the approval of manufacturer could void the user’s authority to operate this equipment.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux 
appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions 
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de 
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
susceptible d'en compromettre le fonctionnement.

Summary of Contents for HT Keyfob










Reviews: