Linx Cooler Module-140, Owner'S Manual, Page: 3 / 12

05-3028-C 3
Section 1. Safety Precautions

The LINX Cooler Module (LCM) must be installed, serviced and maintained by an Authorized Dealer
to assure that it complies with state and local laws and regulations as well as providing optimum
performance. Massachusetts requires a licensed plumber to install the product according to
plumbing code 248-CMR of the Commonwealth of Massachusetts. A Supplement to the Owner’s
Manual for Installation and Maintenance is available for qualified technicians.

Read and follow all instructions carefully before using the LINX Cooler Module.

DO NOT open the cell lids or outer enclosure when the LCM is powered. There is a risk of
electrical shock.

If the detachable power cord is damaged it must be replaced.

Use with cold feed water ONLY (33-100˚F; 1-40˚C).

DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the systems.

The LCM is designed to operate with supply water pressure in the range of 20-100 psi (130-690 kPa).
If the pressure exceeds 100 psi (690 kPa), a pressure regulator must be installed.

The LCM is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the LCM by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the LCM.

Grounding Instructions: The LCM must be properly grounded. In the event of a malfunction,
grounding will reduce the risk of electric shock. The LCM is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The equipment into which the LCM is
installed must itself be plugged into an appropriate outlet that is installed and grounded in accordance
with all local codes and ordinances.
Warning: Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician if you are in doubt whether the LCM is properly
grounded. Do not modify the plug provided for the LCM or the appliance in which it is installed. If
the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.