Linx 7900 Quick Start Manual Download

Page: 64 / 81

Chapter 6: Look after your printer

FA69315–3 English

Linx 5900 & 7900 Quick Start Guide

Press the

Exit

key to return to the

Print Monitor

page. The Ink Low

or Solvent Low warnings and refill event messages disappear from the

Printer Status

area.

If there are current fluid events that require you to enter SureFill®
codes, highlight the required refill event message at the

SureFill

page

(see Figure 6-4 on page 48) and press the

Enter SureFill Code

key.

Follow steps

above.

SureFill code messages

The printer displays an information message:

•

If you enter an incorrect SureFill® code.

•

If you enter a SureFill® code that refers to an ink or solvent that is out
of date (that is the ink or solvent shelf life has expired).

•

If you enter a SureFill® code that is not correct for the ink or solvent
types that the printer uses.

•

If you enter a SureFill® code that was used previously.

Follow the instructions on the screen to continue to refill the ink or solvent.

Summary of Contents for 7900


















































































Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands

Linx 7900, Quick Start Manual

Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands