Linx 7900 Quick Start Manual Download

Page: 61 / 81

Chapter 6: Look after your printer

Linx 5900 & 7900 Quick Start Guide

FA69315–3 English

1. When the printer ink level or solvent level becomes low, the printer

displays the

SureFill

page to show that you must refill the ink or

solvent. The printer asks you to enter the SureFill® code that is on the
label of the ink or solvent bottle.

Figure 6-4. SureFill page (Ink Refill Requested)

To cancel the ink or solvent refill, press the

Exit

key to return the

Print Monitor

page. The

Printer Status

area shows any ink or

solvent low or refill event messages (for example, REFILL
REQUIRED). The

SureFill

soft key on the left of the screen is

enabled.

Figure 6-5. Print Monitor page: Ink Low

To now refill the ink or solvent, press the

SureFill

key to display the

SureFill

page and continue to step

on page 49.

73020

73021

Summary of Contents for 7900


















































































Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands

Linx 7900, Quick Start Manual

Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands