Linx 7900 Quick Start Manual Download

Page: 62 / 81

Chapter 6: Look after your printer

FA69315–3 English

Linx 5900 & 7900 Quick Start Guide

2. Press the

Enter SureFill Code

key and enter the nine-character label

code for the selected ink or solvent type.

Figure 6-6. SureFill Code page

3. Press the

key. A code that is valid identifies the configured ink

type and solvent type for the printer, and refers to an ink or solvent
with a shelf life that has not expired.
If you enter a valid code, the

Ink Refill

page is displayed. Follow the

instructions on the screen (or in steps

below) to refill the ink or

solvent.

4. Remove the solvent or ink filler cap, as required:

•

The white filler cap, marked “S”, for solvent.

•

The black filler cap, marked with an ink-drop icon, for ink.

5. Remove the cap from the bottle and then invert the bottle into the

correct filler point, as shown in Figure 6-7.

Figure 6-7. Refill with ink and solvent

73022

73043

Summary of Contents for 7900


















































































Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands

Linx 7900, Quick Start Manual

Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands