background image

1. DEFINITIONS

This PZ Series lever hoist has been designed for vertically lifting and lowering loads, by hand, under the 
normal atmospheric conditions of the work place.

WARNING!

DANGER!

CAUTION!

Indicates an imminently hazardous situation which, if not avoided, 
may result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided, 
may result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury.

2. SAFETY RULES 
 

2.1 General

 

Failure to read and comply with the contents of this manual can result in serious bodily injury or 

death and/or property damage. Although you may be familiar with this or similar equipment, it is strongly 
recommended that you read this manual before installing, operating or maintaining the product. 
 

Equipment described herein should not be used in conjunction with other equipment unless the

necessary and the required safety devices applicable to the system are used. The company shall have no 
liability to the client for any loss, damage or other claims for compensation arising from this type of misuse. 
Modifications to upgrade, re-rate, or otherwise alter this equipment should be authorized only by the original 
equipment manufacturer. 

DANGER!

1. NEVER use a hoist 
for lifting, supporting or 
transporting people.

2. NEVER use your foot to 
apply pressure on the hoist.

3. NEVER use two or more hoists 
together to lift load beyond the 
rated capacity of hoist.

4. NEVER lift up load 
beyond the rated 
capacity of the hoist.

5. NEVER lift or 
transport loads over or 
near people.

2.2 Rules before use

 

 

 

Hoist operators are required to read this manual, the warnings contained 

 

 

 

within it and follow safety instructions and warning labels on the hoist or lifting 

 

 

 

systems. The operator is also required to familiarize themselves with the

 

 

 

hoist controls before being authorized to operate the hoist or lifting system.

CAUTION!

-1-

Summary of Contents for LINX-LIFT PZ Series

















Reviews: